Description

Electronics

• (1) Robot Brain (2nd generation) [228-6480]
• (6) Smart Motor [228-2560]
• (1) Controller (2nd Generation) [228-6470]
• (1) Robot Battery (Li-Ion, 2000 mAh) [228-7045]
• (1) Touch LED [228-3010]
• (1) Bumper Switch [228-2677]
• (1) Optical Sensor [228-7082]
• (1) Distance Sensor [228-7106]
• (2) 600mm Cable
• (2) 400mm Cable
• (3) 300mm Cable
• (2) 200mm Cable
• (1) USB A-C Cable [269-6961]

Structure

• (5) 1×2 Beam [228-5573-001]
• (6) 1×3 Beam [228-5573-002]
• (7) 1×4 Beam [228-5573-003]
• (8) 1×5 Beam [228-5573-004]
• (6) 1×6 Beam [228-5573-005]
• (4) 1×7 Beam [228-5573-006]
• (8) 1×8 Beam [228-5573-007]
• (4) 1×9 Beam [228-5573-008]
• (6) 1×10 Beam [228-5573-009]
• (2) 1×11 Beam [228-5573-010]
• (4) 1×12 Beam [228-5573-011]
• (2) 1×13 Beam [228-5573-012]
• (2) 1×14 Beam [228-5573-013]
• (4) 1×16 Beam [228-5573-014]
• (2) 1×18 Beam [228-5573-015]
• (2) 1×20 Beam [228-5573-016]
• (5) 2×2 Beam [228-3944-017]
• (4) 2×3 Beam [228-3944-018]
• (6) 2×4 Beam [228-3944-019]
• (4) 2×5 Beam [228-3944-020]
• (6) 2×6 Beam [228-3944-021]
• (6) 2×7 Beam [228-3944-022]
• (6) 2×8 Beam [228-3944-023]
• (2) 2×9 Beam [228-3944-024]
• (4) 2×10 Beam [228-3944-025 ]
• (10) 2×12 Beam [228-3944-026]
• (2) 2×14 Beam [228-3944-027]
• (4) 2×16 Beam [228-3944-028]
• (2) 2×18 Beam [228-3944-029]
• (8) 2×20 Beam [228-3944-030]
• (2) 3×3 Plate [228-3616-031]
• (4) 3×4 Plate [228-3616-032]
• (4) 3×6 Plate [228-3616-034]
• (2) 3×10 Plate [228-3616-036]
• (4) 3×16 Plate [228-3616-038]
• (4) 4×4 Plate [228-3616-040]
• (2) 4×8 Plate [228-3616-043]
• (221) 1×1 Connector Pin [228-3196-060]
• (53) 1×2 Connector Pin [228-5573-061]
• (21) 2×2 Connector Pin [228-3616-062]
• (11) 0.25x Pitch Standoff [228-3943-063]
• (13) 0.5x Pitch Standoff [228-3201-064]
• (13) 1x Pitch Standoff [228-3201-065]
• (15) 2x Pitch Standoff [228-3201-067]
• (5) 4x Pitch Standoff [228-3201-070]
• (6) 6x Pitch Standoff [228-3201-072]
• (7) 1×1 Idler Pin [228-3446-073]
• (6) 2x Pitch Plastic Motor Shaft [228-3446-078]
• (6) 4x Pitch Plastic Motor Shaft [228-5579-079]
• (6) 3x Pitch Capped Plastic Shaft [228-3944-081]
• (4) 5x Pitch Capped Plastic Shaft [228-3616-083]
• (7) 0x2 Idler Pin [228-5579-084]
• (22) 0x2 Connector Pin [228-3944-086]
• (21) 0x3 Connector Pin [228-3616-087]
• (6) 3x Pitch Plastic Motor Shaft [228-3196-094]
• (50) 0x1 Sheet Pin [228-3943-099]
• (11) 0.5x Pitch Standoff Extender [228-3201-109]
• (24) Washer [228-3944-112]
• (28) 0.25x Pitch Spacer [228-3201-114]
• (2) 4x Pitch Shaft [228-2500-120]
• (4) 6x Pitch Shaft [228-2500-122]
• (6) Large Chassis Corner Connector [228-3943-126]
• (15) Small Chassis Corner Connector [228-3943-127]
• (11) 2x Wide, 1×2 Corner Connector [228-3943-128]
• (9) 1x Wide, 1×1 Corner Connector [228-3943-129]
  (13) 1x Wide, 1×1 Offset Corner Connector [228-
• 943-130]
  (4) 2x Wide, 2×1 Offset Corner Connector [228-3943-131]
• (5) 2x Wide, 2×1 Corner Connector [228-3943-132]
• (3) 2x Wide, 1×1 Offset Corner Connector [228-3943-133]
• (10) 2x Wide, 2×2 Corner Connector [228-3943-134]
• (8) 2x Wide, 1×2 Offset Corner Connector [228-3943-135]
• (4) 2x Wide, 2×2 Offset Corner Connector [228-3943-136]
• (4) 2x Wide, 3×2 Corner Connector [228-3943-137]
• (32) Rubber Shaft Collar [228-2500-143]
• (4) 3×4 Tee Beam [228-3196-144]
• (5) 2×3 Right Angle Beam [228-3196-145]
• (4) 3×3 Right Angle Beam [228-3196-146]
• (4) 3×3 30 Degree Angle Beam [228-3446-147]
• (4) 3×3 45 Degree Angle Beam [228-3196-148]
• (4) 3×3 60 Degree Angle Beam [228-5579-149]
• (4) 3×5 Right Angle Beam [228-3196-150]
• (4) 4×4 Offset Right Angle Beam [228-3196-151]
• (10) 1×1 Beam [228-5573-154]
• (3) Rubber Band Anchor [228-3196-157]
• (11) Cable Anchor [228-3201-158]
• (13) Mini Standoff Connector [228-3196-170]
• (12) Straight Standoff Connector [228-3196-171]
• (9) End Standoff Connector [228-3196-172]
• (10) 45 Degree Standoff Connector [228-3196-175]
• (9) 90 Degree Standoff Connector [228-3196-178]
• (4) 2×11 Beam [228-3944-206]
• (2) Tire (200 mm Travel) [228-3201-209]
• (16) 12 Tooth Gear [228-3196-213]
• (6) 36 Tooth Gear [228-3196-214]
• (2) 60 Tooth Gear [228-3196-215]
• (2) Worm Gear [228-3196-219]
• (2) Double 2x Wide, 2×2 Corner Connector [228-3943-220]
• (8) 24 Tooth Gear [228-3196-227]
• (4) 48 Tooth Gear [228-3196-228]
• (113) Chain Link [228-3616-230]
• (160) Tank Tread Attachment Link [228-3616-231]
• (8) 8 Tooth Sprocket [228-3446-232]
• (6) 16 Tooth Sprocket [228-3446-233]
• (6) 24 Tooth Sprocket [228-3446-235]
• (13) Traction Link [228-2878-239]
• (11) Short Intake Flap [228-2878-240]
• (10) Medium Intake Flap [228-2878-241]
• (8) Long Intake Flap [228-2878-242]
• (2) 1×4 Crank Arm with 23 Tooth Gear [228-3196-246]
• (8) 12t Hybrid Gear [228-3196-250]
• (6) 24t Hybrid Gear [228-3196-251]
• (6) 36t Hybrid Gear [228-3196-252]
• (2) 12x Pitch Shaft [228-2500-263]
• (8) Double 1x Wide, 1×1 Corner Connector [228-3943-270]
• (5) Double 2x Wide, 1×2 Corner Connector [228-3943-271]
• (8) Double 1x Wide, 2×1 Corner Connector [228-3943-272]
• (6) Double 2x Wide, 1×2 Offset Corner Connector [228-3943-274]
• (4) Double 2x Wide, 2×2 Double Offset Corner Connector [228-3943-277]
• (4) 1x Wide, 1×2 Corner Connector [228-3943-279]
• (4) 2x Wide, 1×3 Offset Corner Connector [228-3943-283]
• (5) 1x Pitch Plastic Motor Shaft [228-3446-328]
• (4) 2x Wide, 60 Degree Omni 1×2 Corner Connector [228-3943-368]
• (4) 2x Wide, 30 Degree Right 1×2 Corner Connector [228-3943-371]
• (4) 2x Wide, 30 Degree Left 1×2 Corner Connector [228-3943-372]
• (2) 1×1 Left Corner Beam [228-3944-391]
• (2) 1×1 Right Corner Beam [228-3616-392]
• (4) 2×1 Left Corner Beam [228-3944-400]
• (4) 2×1 Right Corner Beam [228-3616-401]
• (2) 2×2 Left Corner Beam [228-3944-406]
• (2) 2×2 Right Corner Beam [228-3616-407]
• (2) 2×1 Extended Left Corner Beam [228-3944-408]
• (2) 2×1 Extended Right Corner Beam [228-3616-409]
• (2) 2×2 Extended Left Corner Beam [228-3944-412]
• (2) 2×2 Extended Right Corner Beam [228-3616-413]
• (2) 1x Wide Spool [228-3196-420]
• (2) 2x Wide Spool [228-3446-421]
• (2) 12x Pitch Rope [228-3201-430]
• (2) 24x Pitch Rope [228-3447-438]
• (1) 48x Pitch Rope [228-3943-442]
• (2) Silicone Rubber Band #32 [228-3446-468]
• (2) Silicone Rubber Band #117B [228-3446-470]
• (2) 6x2x2 Tee Beam [228-3196-478]
• (1) 2×8 Smooth Panel [228-3943-524]
• (8) 8x Pitch Standoff [228-3201-1061]
• (10) Truss Standoff Connector [228-3196-1109]
• (8) 1×6 (3-4-5 Triangle) Diagonal Offset Truss Beam [228-3196-1110]
• (2) 7x9x11 (6-8-10 Triangle) Truss Plate [228-3616-1117]
• (4) 1×3 Center Lock Beam [228-3196-1141]
• (2) 3×3 Wye Lock Beam [228-5579-1159]
• (6) 2×3 Delta Tee Beam [228-3446-1189]
• (6) 2x4x2 Double 60 Degree Beam [228-5579-1199]
• (2) Small Wheel Hub (44mm) [228-5573-1208]
• (3) 2×30 mm Square Silicone Band [228-3446-1225]
• (4) 2×4 Wedge Beam [228-3616-1240]
• (4) 3×5 Wedge Beam [228-3616-1245]
• (8) Triple 1x Wide, 1×1 Corner Connector [228-3943-1250]
• (8) Tripple 2x Wide, 2×2 Corner Connector [228-3943-1253]
• (2) 1×2 Left Chassis Corner Connector [228-3943-1254]
• (2) 1×2 Right Chassis Corner Connector [228-3943-1255]
• (4) Quad 2x Wide, 2×2 Corner Connector [228-3943-1258]
• (4) 2x Wide, 3×3 60 Degree Angle Beam [228-3196-1268]
• (4) Cam Follower [228-3446-1303]
• (2) Small 2x Pitch Drop Cam [228-3446-1305]
• (2) Large 1x Pitch Drop Cam [228-3446-1306]
• (2) 4×3 1x Offset Trapezoid Beam [228-3616-1357]
• (1) 6x Pitch Flywheel (75g) [228-7092-1402]
• (2) 16 Tooth Ratchet [228-5579-1407]
• (3) Short Low-Profile Pawl [228-5579-1411]
• (8) .5x Pitch Idler Pulley [228-3196-1413]
• (6) 1×6 Linear Motion Beam [228-5573-1457]
• (6) 1×8 Linear Motion Beam [228-5573-1459]
• (6) 2x Pitch Linear Motion Bracket [228-5573-1469]
• (4) 1x Pitch Linear Motion Bracket (Snap) [228-5573-1470]
• (8) 1×6 Continuous Linear Motion Rack Gear [228-3944-1473]
• (1) 2x Pitch Shock Absorber (Strong) [228-5654-480]
• (4) 2×2 30 Degree Beam [228-3446-1485]
• (4) 2×2 45 Degree Angle Beam [228-3196-1486]
• (5) 1×4 Low-Profile End Lock Beam [228-3196-1548]
• (4) 2x6x2 30 Degree Jogged Beam [228-3446-1556]
• (1) 2x Pitch Shock Absorber (Weak) [228-5654-1560]
• (4) 3×12 Girder Plate; 2×8 2x Offset Trapezoid [228-3616-1600]
• (16) Ball Pin Bushing [228-3446-1660]
• (2) 1×3 Ball Socket Linkage [228-3196-1664]
• (2) 1×4 Ball Socket Linkage [228-3196-1665]
• (8) 1×4 Single-Ended Ball Socket Beam [228-3196-1689]
• (10) 2×2 Center Offset Round Lock Beam [228-3196-1925]
• (4) 2x Wide, Ø32.2mm Diameter Hub [228-3944-1950]
• (2) 2x Wide, Ø48.5mm Diameter Hub [228-3943-1953]
• (4) 2x Wide, 3.5x Pitch Diameter Balloon Tire (Trapezoid Offroad Tread) [228-3201-1957]
• (2) 2x Wide, 5x Pitch Diameter Balloon Tire (Racing Slick Tread) [228-3201-1958]
• (2) Small Rubber Intake Belt [228-3201-1960]
• (1) Large Rubber Intake Belt [228-3201-1961]
• (3) 2x Pitch Capped Shaft [228-2500-2219]
• (3) 3x Pitch Capped Shaft [228-2500-2221]
• (3) 4x Pitch Capped Shaft [228-2500-2223]
• (2) 5x Pitch Capped Shaft [228-2500-2225]
• (4) 2x Pitch Motor Shaft [228-3446-2234]
• (4) 3x Pitch Motor Shaft [228-3196-2236]
• (4) 4x Pitch Motor Shaft [228-5579-2238]
• (2) 2×12 Plastic Sheet [228-2500-2710]
• (2) 6×6 Plastic Sheet [228-2500-2711]
• (2) 6×12 Plastic Sheet [228-2500-2712]
• (4) Omni Wheels [228-2536]
• (1) Pin Tool [228-4035]